Languages

Concrete Finishing Equipment

Concrete Floor Grinder - Double Disc - S-THSG-DPH

S-THSG-DPH

The dual blade concrete floor grinder is a work horse when it comes to grinding rough surfaces, with the huge grinding area, large areas can be grinded effectively and efficiently. Easy to use switch located on the handle. Large collection of blades ensuring a blade for every surface. Carrying handles for easy transport.

  • Dimension (LxWxH):                1130 x 680 x 1110mm
  • Operating Weight:                     110Kg
  • Working Width:                         552mm
  • Engine:                                      Honda GXV160 (Petrol)
  • Working Speed:                        177rpm
  • Working Capability:                   35 - 50m²/Hr

Concrete Spacer, Horizontal 20/30mm, H2530

H2530

The plastic wire bar supports (concrete spacers), provide maximum protection against corrosion. Concrete spacers are used to space reinforcing bars from the ground and from each other. They come in bags of 500.

H4050 Concrete Spacer, Horizontal 40/50mm, H4050
V25 Concrete Spacer, Vertical 20/30mm, V25

Contractors TM Poker, S-TH28MM

S-TH28MM

These vibrator pokers are driven from petrol, diesel or electric power units. The motor or engine provides rotary motion which is transmitted to the poker head via a flexible drive shaft. The needle casing is made of hardened steel. It has a low electrical input, high performance and is reliable. They are lightweight, have good aeration properties and provide good, reliable vibration. The vibration poker performs the task of vibrating air out of freshly poured concrete.

  • Vibration Poker:                           28mm x 6m
S-TH36MM Contractors TM Poker - S-TH36MM
S-TH45MM Contractors TM Poker - S-TH45MM
... View more

Convertor, S-TCCP13PH

S-TCCP13PH

The GX390QS means you're looking at one of the best engines in the market, more powerful and a quieter performance. Lower fuel consumption and lower emissions makes this an exceptional performance engine with better features.

  • Engine Type:                          Air Cooled 4-stroke
  • Power Output:                        11.7Hp
  • Dimension (LxWxH):              407x485x449
  • Fuel Tank Capacity:               6.1L
  • Dry Weight:                            31.5Kg
  • 1 socket

Delux Vibration Pokers, CV26

CV26

These vibrator pokers are driven from petrol, diesel or electric power units. The motor or engine provides rotary motion which is transmitted to the poker head via a flexible drive shaft. The needle casing is made of hardened steel.

It has a low electrical input, high performance and is reliable. They are lightweight, have good aeration properties and provide good, reliable vibration. The vibration poker performs the task of vibrating air out of freshly poured concrete.

  • Vibration Poker:                           26mm x 5m
CV36 Delux Vibration Pokers, CV36
CV48 Delux Vibration Pokers, CV48
... View more

Diamond Block, CGS276-040705

CGS276-040705
CGS276-040706 Holder for Diamond Block

Diamond Headed Floor Grinder, S-TMWKR70E

S-TMWKR70E

The diamond head grinder is suitable for stone polishing, concrete grinding and polishing, floor finishing. Powered by Briggs & Stratton it has a petrol engine, 12.5Hp, long service and low maintenance cost. Diamond blades are durable and reliable for concrete grinding. Optional griding sizes: six pcs 4 inch blades or three pcs 7 inch blades. Rotated handle is set for blade height turning. Adjustible long handle, effort saving and easy operation.

WKR70E-BLADE Diamond Headed Grinder - Blade for S-TMWKR70E - WKR70E-BLADE

Drive Unit, S-VPM12SQHG

S-VPM12SQHG

Drive units are mainly used in conjunction with vibrating poker needles, or a mechanical submersible pump. Both of these require a flexible shaft, rotating at approximately 2850 to 3500rpm to operate correctly at a given torque. Matching the poker size to the drive unit is critical to attain the specified vibration cycles needed.

  • Engine:                     Honda G200 Petrol - 5.5Hp

 

S-VPM12SQH Drive Units, S-VPM12SQH
S-VPM12SQF Drive Unit, S-VPM12SQF
... View more

Flails - FR300 - 2080302

2080302

The flail scarifier 8 point cutter reduces levels and roughens the concrete surface where it needs to be tiled and removes white lines on tar roads for driveways.

FLAIL200/250 Floor Scarifier - Flails - FLAIL200/250
V630/03/01 Drum for Floor Scarifier

Floor Scarifier - S-FR200GX

S-FR200GX

 For roughening concrete to create a key surface.

Versatile machine for any surface and coatings. Our strong and reliable MC8 scarifying machine (also called floor planner, floor scarifier, milling machine) is ideal for concrete, asphalt and steel surface. Utilizing a variety of hardened steel cutters or tungsten carbide tipped (TCT) cutters or tungsten carbide milling flails. Removing old concrete, layers of paint, caked oil, grease, traffic lane markings,chemical spillages, rust scale, encrustations and irregularities/ thermoplastics.

  • 61kg (134lbs)
  • 4.0kw (5.5hp)
  • Petrol, Honda GX160
  • 200mm Wide
S-FR250GX Floor Scarifier - S-FR250GX