Clear Water Pump 50 mm 4hp 500 L/Min

Additional information

Attribute 1	Suction Port Diameter: 50mm (2 Inch)
Attribute 2	Discharge Port Diameter: 50mm (2 Inch)
Attribute 3	Total Head: 26 m
Attribute 4	Max Suction Head: 8 m
Attribute 5	Max Capacity: 600L/min(36m3/h)
Attribute 6	Displacement: 118 cc
Attribute 7	Maximum Output: 4.0PS/3600rpm (5.5PS/3600rpm)
Attribute 8	Starting System: Recoil
Attribute 9	Fuel: Unleaded gasoline
Attribute 10	Fuel Tank Capacity: 2.5 L
Attribute 11	Carton Dimensions (L x W x H): 520 x 385 x 455mm
Attribute 12	Net/Gross Weight: 24.1kg/25.7kg
Attribute 13	Inlet/Outlet Connections: 2
Attribute 14	Strainer: 1
Attribute 15	Hose Clamp: 3

Used to pump water from rivers or dams into tanks.

Operation :

Fill the pump with water before use.(Never let the pump run dry)

Connect suction and delivery hose – make sure to insert gaskets.(Especially on the suction hose)

Failing to use the rubber gasket, will result in the pump sucking air,which will prevent the pump from sucking water.

Put the suction hose in the water – Always insure that the filter / strainer is attached at the end of the pipe.

Start the engine

Monitor the water level

Stop engine immediately when the water level reaches the strainer

Never refuel the engine while running.

Do not smoke or use cell phone near the engine while running

Hand protection must be worn while using this equipment.