Clear Water Pump 50 mm Honda

Additional information

Attribute 1	Max. Head(m): 25
Attribute 2	Max. Flow (m3/h): 30
Attribute 3	Max. Suction head: 8
Attribute 4	Outlet / Inlet Size (mm): 50
Attribute 5	Altitude height(m): 1000
Attribute 6	Type: Air cooled, Single Cylinder, OHV, 4-stroke, gasoline engine
Attribute 7	Displacement: 163 cc
Attribute 8	Speed: 3600 rpm
Attribute 9	Cont. Output: 3.67 kW
Attribute 10	Starting System: Recoil Starter
Attribute 11	Lube Oil Capacity: 0.6 L
Attribute 12	Fuel Tank Capacity: 3.6 L
Attribute 13	Dimension (LxWxH): 50x38x43 cm
Attribute 14	Net Weight: 24 kg
Attribute 15	Gross Weight: 25 kg

Used to pump water from rivers or dams into tanks.

Operation :

Fill the pump with water before use.(Never let the pump run dry)

Connect suction and delivery hose – make sure to insert gaskets.(Especially on the suction hose)

Failing to use the rubber gasket, will result in the pump sucking air,which will prevent the pump from sucking water.

Put the suction hose in the water – Always insure that the filter / strainer is attached at the end of the pipe.

Start the engine

Monitor the water level

Stop engine immediately when the water level reaches the strainer

Never refuel the engine while running.

Do not smoke or use cell phone near the engine while running

Hand protection must be worn while using this equipment.

Ear protection must be worn while using this equipment.