R19549,99 incl.Vat
In Stock
nationwide
find a branch
| Attribute 1 | Weight : 116 kg |
|---|---|
| Attribute 2 | Power Unit: 13 Hp Petrol Engine |
| Attribute 3 | Motor Speed: 3000Rpm |
| Attribute 4 | Blade Diameter: Up To 450mm |
| Attribute 5 | Blade Water Feed: 20L Water Tank |
For cutting expansion and contraction joints, neatening of slab/road edges, repairing roads/slabs and cutting of surfaces for cable laying or replacing
Starting:
Check oil level of the engine
Make sure the blade is off the surface to be cut
Turn petrol switch to ON
Open choke (Butterfly closes to close air flow)
Pull recoil full way until it starts
Close choke
Running:
Never force the machine forward
Always use water when cutting
Cut only a maximum of 22mm deep
Stopping:
Turn the petrol switch to OFF
Turn fuel off
Refuelling:
Ensure petrol switch is off before refuelling.
Machine may not be running whilst refuelling.
Do not smoke or use a cell phone whilst refuelling.
Remove fuel cap and place in a clean dry area within reach of the machine.
Pour the fuel into the tank.
Replace fuel cap and move fuel container.
Do not place any plastic bags around the fuel cap as this will close the breather hole in the cap.
Do’s and Don’ts:
Fill the water tank before starting
When cutting, open water to avoid wear on the blade
Eye protection must be worn while using this equipment.
This equipment creates dust. Wear a suitable mask.
Hand protection must be worn while using this equipment.
Industrial footware with steel toecaps whould be worn while using this equipment.
Ear protection must be worn while using this equipment.© 2025 TURNER MORRIS | E&EO
