Description
Hikoki 100 mm belt sander
- +27 (011) 221-3700
- info@turnermorris.co.za
R5095,65
Out of stock
nationwide
find a branch
Hikoki 100 mm belt sander
| Attribute 1 | Power input: 1020WATT |
|---|---|
| Attribute 2 | Sanding belt size: 100 × 610 mm |
| Attribute 3 | Belt speed: 240–420 m/min |
| Attribute 4 | Variable speed: Yes |
| Attribute 5 | Weight (Kg): 5.4 |
The HiKOKI SB10V2 is a 100 mm belt sander designed for sanding and surface finishing of wood, metal, slate, concrete and similar materials. It has a 1020 W motor and variable belt speed.
Disconnect the power:
Make sure the switch is OFF before connecting the machine to the power supply.Inspect the power cable, sanding belt and machine for damage.
Install the sanding belt
Pull the belt-tension lever to release the tension.Fit the 100 × 610 mm sanding belt over the drive and idle pulleys.
Pull the belt-tension lever to release the tension.Fit the 100 × 610 mm sanding belt over the drive and idle pulleys.
Attach dust collection
Select the belt speed
Start sanding
Stopping the machine:
Lift the sander away from the workpiece.Release the trigger.
If continuous operation is engaged, pull the trigger to release the lock.Wait until the sanding belt has completely stopped before placing the machine down.
Hand protection must be worn while using this equipment.
This equipment creates dust. Wear a suitable mask.
Eye protection must be worn while using this equipment.
Ear protection must be worn while using this equipment.
Caution risk of electric shock© 2025 TURNER MORRIS | E&EO