HIKOKI IMPACT DRILL 790 WATT

Description

Attribute 1	Power input:790 W
Attribute 2	Chuck capacity:1.5–13 mm
Attribute 3	Concrete capacity:20 mm (low speed) / 13 mm (high speed)
Attribute 4	Steel capacity:13 mm (low speed) / 8 mm (high speed)
Attribute 5	Wood capacity:40 mm (low speed) / 25 mm (high speed)

Concrete and masonry: drilling holes up to 20 mm using impact action.

Disconnect the drill from the power supply before fitting the bit.Insert the correct drill bit into the 13 mm chuck and tighten securely.

Fit the side handle and adjust the depth gauge where required.Select low speed for larger holes and higher torque.

Select high speed for smaller holes and faster drilling.Select impact mode for concrete, masonry, tiles and similar hard materials.

Use rotary-only mode for steel, wood and plastic.Set the forward/reverse switch to forward for normal drilling.

Start at low trigger speed and increase gradually.Keep both hands on the drill when drilling large holes or using impact mode.

Eye protection must be worn while using this equipment.

Caution risk of electric shock

This equipment creates dust. Wear a suitable mask.

Hand protection must be worn while using this equipment.