Operation Instructions

Preperation: Fill the clean water tank with warm tap water and a low – foam detergent mix

Spray Extraction: Press the trigger to spray the solution onto a small section, loosening ground-in dirt.

Suction Recovery: Press the nozzle firmly against the fabric to vacuum up the dirty water into the recovery tank

Drying: Let the item air dry completeley before use

Emptying and Rinsing the Tanks

Unplug the machine from the electrical outlet before starting any maintenance.

Remove the dirty water (recovery) tank and empty all collected wastewater into a sink or toilet.

Rinse the dirty water tank thoroughly with clean, warm tap water to eliminate trapped residue and debris.

Remove the float stack or filter inside the tank if your model allows it (twist counter clockwise), wash away any gunk, and click it back into place once dry.

Empty the clean water tank if any unused solution remains, and rinse it out to prevent soap film build-up.

Cleaning the Hoses and Nozzles

Clear the suction line by running the machine with clean water in “tool” mode for 15 to 30 seconds after you finish cleaning, which draws all residual dirty fluid out of the flex hose.

Detach the nozzle tool from the hose grip by pressing the locking tab.

Rinse the tool head under a tap and use a small brush or toothpick to pick out any lint, hair, or dirt trapped around the spray nozzle and brush bristles.

Drying and Storing

Wipe down the outer body of the machine with a damp cloth to get rid of any spilled soap or dust.

Leave all parts open and detached (tanks unsealed and lying separate from the base) in a well-ventilated area until completely dry to prevent mold and unpleasant odours.

Wrap the power cord and coil the flex hose neatly around the designated storage hooks on the machine once every component is dry.