Description
Inverter Generator 12Kva 220Volt
- +27 (011) 221-3700
- info@turnermorris.co.za
R0,00
Out of stock
nationwide
find a branch
Inverter Generator 12Kva 220Volt
| Attribute 1 | Output Rating: 12Kva / 10Kw |
|---|---|
| Attribute 2 | Frequency: 50Hz |
| Attribute 3 | Rated Voltage: 220V |
| Attribute 4 | Rated Current: 45 Amp |
| Attribute 5 | Max Output: 55 Amp |
| Attribute 6 | Weight: 110Kg |
| Attribute 7 | Dimensions(cm): 70 x 65 x 78 |
| Attribute 8 | Fuel Tank(Lt): 32 |
| Attribute 9 | Running Time (50% Load) : 10Hrs |
| Attribute 10 | Running Time(100% Load) : 5 Hrs |
| Attribute 11 | Noize Level: 60 Db |
| Attribute 12 | Solar Inverter Signal Port : 2 Wire |
| Attribute 13 | Starting System : recoil & Key Start |
| Attribute 14 | Digital Hour meter |
| Attribute 15 | 12Volt DC Output |
Inverter generators provide highly stable, “clean” power that is safe for sensitive electronics. They are significantly quieter, lighter, and more fuel-efficient than traditional generators(by adjusting engine speed to match power demand)
Always operate outdoors in a well-ventilated area. Never run the unit in garages or near open windows to prevent carbon monoxide
Fuel: Ensure the fuel tank is filled with fresh, unleaded petrol.
Oil Level: Check the oil dipstick. 10W-30 or 15W-40 4-stroke oil. Running the engine low on oil can cause permanent damage.
Starting the Generator:
Fuel Valve: Turn the fuel valve/petcock to the ON position.
Turn Engine switch to “On” Position
Press and hold the start button.
Recoil Start: If using the pull cord, pull it gently until you feel resistance, then give it a firm, steady pull.
Connecting Appliances
Output Check: Wait a minute or two for the generator to idle and output indicators (green light on inverter) to stabilize.
Plug-in: Connect your heavy-duty, outdoor-rated extension cords or connect via a manual transfer switch to the generator’s receptacle panels.
Shutting Down
Turn Off Devices: Turn off and unplug all connected appliances to prevent power surges.
Cool Down: Let the generator run with no load for 2 to 3 minutes to allow the engine to cool.
Stop Engine: Turn the ignition key or engine switch to the OFF position.
Caution risk of electric shock© 2025 TURNER MORRIS | E&EO