RAMMER PROFESSIONAL 65KG HONDA PETROL 4HP

Application

Compacts many materials in medium and deep layers including trenches, foundations, backfills etc.

Starting:

Turn Petrol on

Accelerator lever should be in idle position before starting

Open choke (Butterfly closes the air flow)

Pull the recoil until the machine starts

Close the choke (Butterfly opens the air flow)

Let the machine warm up before accelerating

Running:

Ensure the thickness of non-compacted material is approximately 300mm

3 to 4 passes of the machine advancing at its normal pace will be optimum

Do not over compact or run the machine over a hard surface

Always run the machine at full power

Don’t force the machine only guide it

Stopping:

Before shutting down make sure the machine is running on a safe flat surface

Make sure the machine is in your control

Reduce the throttle fully so that the engine can fully cut out

Turn off the petrol

Refuelling:

Allow the machine to cool down before refuelling

Machine may not be running whilst refuelling.

This equipment creates dust. Wear a suitable mask.

Ear protection must be worn while using this equipment.

Industrial footware with steel toecaps whould be worn while using this equipment.

Hand protection must be worn while using this equipment.